Olympus IPLEX MX II - Manual (Page 29)

23
Chapter 3 Preparation and inspection before observation
4
Insert the battery so that the ribbon passes under it. This is so you
can pull the ribbon to remove the battery.
CAUTION
• When loading the battery, check to make sure the main unit’s battery contacts and the
battery terminals are positioned correctly.
• Never try to force the battery if it does not slide in easily. Check to make sure that the battery
is positioned correctly and that there is no problem with its terminals. Trying to force the
battery in may cause malfunction.
5
Close the battery cover and move the lock release lever on the
battery cover as shown in the figure below to lock it.
NOTE
• If you are having trouble locking the battery cover, press on the cover while moving the lock
release lever.
Ribbon
Lock release lever