Olympus IPLEX MX II - Manual (Page 48)

42
Chapter 4 Basic operations
„ Date and time settings
Set the current date and time before using the system for the first time. For more
information, see “Setting the date and time” (page 60).
„ Checking the illumination lighting
WARNING
• The Illumination emitted from the insertion tube distal end may heat and ignite a nearby
object. Be sure to set the illumination light turn off the LIGHT button ( ) on the front panel of
the main unit when not using the instrument.
• Do not allow the light emitted from the insertion tube’s distal end enter your eye directly.
Otherwise, an eye injury may result.
1
Confirm that the light indicator is shown on the screen. If it is not,
press the LIGHT button (
) on the front panel to make it appear.
2
Verify the light is emitted from the insertion tube to ensure that the
light source is turned on.
„ White balance adjustment
Adjust the white balance of the insertion tube as required by following the
procedure described in “Live screen/frozen screen menu display and functions”
in “WHITE BALANCE” (page 57).
„ Checking the angulation functions
1
Straighten the insertion tube.
2
Manipulate the [ANGLE] joystick slowly and ensure that the
angulation section moves smoothly.
CAUTION
• Repair is required if the joystick shaft is bent or if the knob is detached. Contact Olympus.
NOTE
• The angulation movement is interlocked with the angle and direction of the [ANGLE] joystick
movements.