Olympus IPLEX MX II - Manual (Page 49)

43
Chapter 4 Basic operations
„ Checking the angulation lock
1
Pull the [ANGLE LOCK] lever up until it clicks. Confirm that
angulation remains locked even when you remove your finger from
the [ANGLE] joystick.
2
Pull the [ANGLE LOCK] lever up until it clicks again to confirm the
angle lock is released.
Every time the [ANGLE LOCK] lever is pulled up and clicks, it changes from
locked to unlocked and vise versa.
CAUTION
• Do not use the [ANGLE] joystick while the angle lock is on. Otherwise it may cause an
overload malfunction.
• A red mark is visible on the side of the [ANGLE LOCK] lever when the angle lock is on. If the
articulation feels restricted or heavy to operate, check whether the angle lock is on or not.