ZyXEL Communications Prestige 645R - Manual (Page 96)

Prestige P645 ADSL Internet Access Router
7-4 Bridging Setup
Once you have completed filling in the Network Layer Options Menu, press [ENTER] to return to menu
11.1. Then press [ENTER] at the message [Press ENTER to Confirm…] to save your configuration, or
press [ESC] to cancel.
7.3 Bridge Static Route Setup
Similar to network layer static routes, a bridging static route tells the Prestige 645R about the route to a node
before a connection is established. You configure bridge static routes in menu 12.3.1, by pressing 3 in menu
12 and then selecting one of the bridge static routes as shown below.
Figure 7-3 Menu 12.3 - Bridge Static Route Setup
Figure 7-4 Menu 12.3.1 - Edit Bridge Static Route
Menu 12.3 - Bridge Static Route Setup
1. ________
2. ________
3. ________
4. ________
Enter selection number:
Menu 12.3.1 - Edit Bridge Static Route
Route #: 21
Route Name=
Active= No
Ether Address= ?
IP Address=
Gateway Node= 1
Press ENTER to CONFIRM or ESC to CANCEL: