ZyXEL Communications Prestige 645R - Manual (Page 147)

Prestige 645 ADSL Internet Access Router
11-6 Configuration and Firmware File Maintenance
COMMAND DESCRIPTION
Send/Fetch Use “Send” to upload the file to the Prestige and “Fetch”
to back up the file on your computer.
Local File Enter the path and name of the firmware file (*.bin
extension) or configuration file (*.rom extension) on your
computer.
Remote File This is the filename on the Prestige. The filename for the
firmware is “ras” and for the configuration file, is “rom-0”.
Binary Transfer the file in binary mode.
Abort Stop transfer of the file.
TFTP over WAN will not work if you have applied a filter in menu 11.5 (WAN) to block Telnet service.
11.3 Restore Configuration
Menu 24.6 -- System Maintenance - Restore Configuration allows you to restore the configuration via
FTP or TFTP to your Prestige. The preferred method is FTP. Note that this function erases the current
configuration before restoring the previous backup configuration; please do not attempt to restore unless
you have a backup configuration stored on disk. To restore configuration using FTP or TFTP is the same as
uploading the configuration file, please refer to the following sections on FTP and TFTP file transfer for
more details. The Prestige restarts automatically after the file transfer is complete.