ZyXEL Communications Prestige 645R - Manual (Page 65)

Prestige P645 ADSL Internet Access Router
Remote Node Configuration 4-3
Scene 3. Multiple VCs
If you have an equal number (or more) of VCs than the number of protocols, then select RFC-1483
encapsulation and VC-based multiplexing.
Figure 4-2 Menu 11.1 Remote Node Profile
Table 4-1 Remote Node Profile Menu Fields
FIELD DESCRIPTION EXAMPLE
Rem Node Name This is a required field [?]. Enter a descriptive name for the
remote node, for example, “Changeme”. This field can be up to
eight characters. This name must be unique from any other
remote node name. Changeme
Active Press the [SPACE BAR] to select either Yes or No. Inactive
nodes are displayed with a minus sign (-) at the beginning of
the name in menu 11. No
Menu 11.1 - Remote Node Profile
Rem Node Name= ChangeMe
Active= Yes
Encapsulation= PPP
Multiplexing= VC-based
Incoming:
Rem Login=
Rem Password=********
Outgoing:
My Login= oscar
My Password= ********
Authen= CHAP/PAP
Route= IP
Bridge= No
Edit PPP Options= No
Rem IP Addr= 0.0.0.0
Edit IP/IPX/Bridge= No
Session Options:
Edit Filter Sets= No
PPPoE Idle Timeout (sec)= N/A
PPPoE Service Name= N/A
Schedule Sets= N/A
Press ENTER to CONFIRM or ESC to CANCEL:
Enter a unique
name, up to eight
characters, for the
remote node.
Use 0.0.0.0 to
connect to your
ISP or enter the IP
address of the
remote gateway
here.