Snmp traps, 4 snmp traps – ZyXEL Communications Prestige 645R User Manual
Page 130

Prestige 645 ADSL Internet Access Router
SNMP Configuration
9-5
9.4 SNMP Traps
The Prestige will send traps to the SNMP manager when any one of the following events occurs:
Table 9-2 SNMP Traps
TRAP #
TRAP NAME
DESCRIPTION
1 coldStart
(defined in RFC-1215)
A trap is sent after booting (power on).
2 warmStart
(defined in RFC-1215)
A trap is sent after booting (software reboot).
3 linkUp
(defined in RFC-1215)
A trap is sent with the port number.
4 authenticationFailure
(defined in
RFC-1215)
A trap is sent to the manager when receiving any SNMP
get or set requirements with wrong community (password).
5 whyReboot
(defined in ZYXEL-
MIB)
A trap is sent with the reason of restart before rebooting
when the system is going to restart (warmstart).
5a
For intentional reboot :
A trap is sent with the message "System reboot by user!" if
reboot is done intentionally, (e.g. download new files, CI
command "sys reboot", etc.).
5b
For fatal error :
A trap is sent with the message of the fatal code if the
system reboots because of fatal errors.
6 linkDown
(defined in RFC-1215)
A trap is sent with the port number when any of the links
are down. See the following table.