ZyXEL Communications Prestige 645R - Manual (Page 73)

Prestige P645 ADSL Internet Access Router
Remote Node TCP/IP Configuration 5-3
Figure 5-3 Menu 11.3 for LLC-based multiplexing
In this case, only one set of VPI and VCI numbers need be specified for all protocols. The valid range for
the VPI is 1 to 255 and for the VCI is 32 to 65535 (1 to 32 is reserved for local management of ATM
traffic).
The following diagram explains the Sample IP Addresses to help you understand the My Wan Addr field
in menu 11.3. Refer to the section on Internet access for a brief review of what a WAN IP is. My WAN
Addr indicates the local Prestige WAN IP while Rem IP Address indicates the peer WAN IP.
Menu 11.3 - Remote Node Network Layer Options
VPI/VCI (LLC-mux or PPP/PPPoE Encap):
VPI #= 0
VCI #= 35
IP Options:
Rem IP Addr: 0.0.0.0
Rem Subnet Mask= 0.0.0.0
IP Address Assignment = Dynamic
My WAN Addr= 0.0.0.0
Single User Account= Yes
Metric= 2
Private= No
RIP Direction= None
Version= RIP-1
Multicast= None
IP Policies=
IPX Options :
Rem LAN Net #= 00000000
My WAN Net #= 00000000
Hop Count= 1
Tick Count= 2
W/D Spoofing(min)= N/A
SAP/RIP Timeout(min)=N/A
Dial-On-Query= N/A
Bridge Options:
Dial-On-Broadcast= N/A
Ethernet Addr Timeout(min)= 0
Enter here to CONFIRM or ESC to CANCEL: