ZyXEL Communications Prestige 645R - Manual (Page 129)

Prestige 645 ADSL Internet Access Router
9-4 SNMP Configuration
Figure 9-2 Menu 22 — SNMP Configuration
The following table describes the SNMP configuration parameters.
Table 9-1 SNMP Configuration Menu Fields
FIELD DESCRIPTION DEFAULT
Get
Community Enter the get community, which is the password for the incoming
Get- and GetNext- requests from the management station. public
(default)
Set
Community Enter the set community, which is the password for incoming Set-
requests from the management station. public
(default)
Trusted Host If you enter a trusted host, your Prestige will only respond to
SNMP messages from this address. If you leave the field set to
0.0.0.0 (default), your Prestige will respond to all SNMP
messages it receives, regardless of source. 0.0.0.0
(default)
Trap:
Community Enter the trap community, which is the password sent with each
trap to the SNMP manager. public
(default)
Trap:
Destination Enter the IP address of the station to send your SNMP traps to. 0.0.0.0
(default)
Once you have completed filling in Menu 22 - SNMP Configuration, press [ENTER] at the
message [Press ENTER to Confirm] to save your configuration, or press [ESC] to cancel.
Menu 22 - SNMP Configuration
SNMP:
Get Community= public
Set Community= public
Trusted Host= 0.0.0.0
Trap:
Community= public
Destination= 0.0.0.0
Press ENTER to Confirm or ESC to Cancel: