ZyXEL Communications Prestige 645R - Manual (Page 117)

Prestige 645 ADSL Internet Access Router
8-18 Filter Configuration
8.3.3 Novell IPX Filter Rule
This section shows you how to configure an IPX filter rule. IPX filters allow you to base the rules on the
fields in the IPX headers.
To configure an IPX rule, select IPX Filter Rule from the Filter Type field and press [ENTER] to open
Menu 21.1.1 IPX Filter Rule, as shown in the figure below.
Figure 8-13 Menu 21.1.1 - IPX Filter Rule
The following table describes the IPX Filter Rule.
Table 8-7 IPX Filter Rule Menu Fields
FIELD DESCRIPTION
IPX Packet Type Enter the IPX packet type (1-byte in hexadecimal) you wish to
filter.
The popular types are (in hexadecimal):
01 - RIP
04 - SAP
05 - SPX (Sequenced Packet eXchange)
11 - NCP (NetWare Core Protocol)
14 - Novell NetBIOS
Menu 21.1.1 - IPX Filter Rule
Filter #: 1,1
Filter Type= IPX Filter Rule
Active= No
IPX Packet Type=
Destination: Network #=
Node #=
Socket #=
Socket # Comp= None
Source: Network #=
Node #=
Socket #=
Socket # Comp= None
Operation= N/A
More= No Log= None
Action Matched= Check Next Rule
Action Not Matched= Check Next Rule
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.