ZyXEL Communications Prestige 645R - Manual (Page 141)

Prestige 645 ADSL Internet Access Router
10-10 System Maintenance
10.5 Command Interpreter Mode
The Command Interpreter (CI) is a part of the main system firmware. The CI provides much of the same
functionality as the SMT, while adding some low-level setup and diagnostic functions. The CI can be
entered from the SMT by selecting menu 24.8. Access is by Telnet. For more detailed information on CI
commands see the Support Notes on the Supporting CD. Enter 8 from Menu 24 - System Maintenance. A
list of valid commands can be found by typing
help
or
?
at the command prompt. Type “exit” to return to
the SMT main menu when finished.
Figure 10-8 Command mode
Enter Menu Selection Number: 8
Copyright (c) 1994 – 2001 ZyXEL Communications Corp.
ras> ?
Valid commands are:
sys exit device ether
wan poe ip ppp
bridge ipx hdap