ZyXEL Communications Prestige 645R - Manual (Page 40)

Prestige P645 ADSL Internet Access Router
2-10 Hardware Installation & Setup
Figure 2-9 Menu 1 – General Setup
Table 2-4 General Setup Menu Fields
FIELD DESCRIPTION EXAMPLE
System Name Choose a descriptive name for identification purposes. This name can be
up to 30 alphanumeric characters long. Spaces are not allowed, but
dashes “-” and underscores "_" are accepted. HAL
Location (optional) Enter the geographic location (up to 31 characters) of your Prestige. branch
Contact Person's
Name (optional) Enter the name (up to 30 characters) of the person in charge of this
Prestige. JohnDoe
Protocols: Press the [SPACE-BAR] to select Yes or No to turn the individual routing
protocols on or off.
Route IP Set this field to Yes to enable IP routing. You must enable IP routing for
Internet access. Yes
Route IPX Set this field to Yes to enable IPX routing. No
Bridge Turn on/off bridging for protocols not supported (e.g., SNA) or not turned
on in the previous Route fields. No
2.10 Ethernet Setup
This section describes how to configure the Ethernet using Menu 3 – Ethernet Setup. From the main
menu, enter 3 to open menu 3.
Menu 1 - General Setup
System Name= HAL
Location= branch
Contact Person's Name= JohnDoe
Route IP= Yes
Route IPX= No
Bridge= No
Press ENTER to Confirm or ESC to Cancel: