beautypg.com

System maintenance, Command interpreter mode overview, Chapter 37 system maintenance – ZyXEL Communications 650 Series User Manual

Page 401: 1 command interpreter mode overview

background image

Prestige 650 Series User’s Guide

System Maintenance

37-1

Chapter 37

System Maintenance

This chapter leads you through SMT menus 24.8 to 24.10.

37.1 Command Interpreter Mode Overview

The Command Interpreter (CI) is a part of the main system firmware. The CI provides much of the same
functionality as the SMT, while adding some low-level setup and diagnostic functions. Enter the CI from
the SMT by selecting menu 24.8. See the included disk or the zyxel.com web site for more detailed
information on CI commands. Enter 8 from Menu 24 — System Maintenance. A list of valid commands
can be found by typing help or ? at the command prompt. Type “exit” to return to the SMT main menu
when finished.

Figure 37-1 Command Mode in Menu 24

Menu 24 - System Maintenance

1. System Status
2. System Information and Console Port Speed

3. Log and Trace

4. Diagnostic

5. Backup Configuration

6. Restore Configuration

7. Upload Firmware

8. Command Interpreter Mode

9. Call Control

10. Time and Date Setting

11. Remote Management

Enter Menu Selection Number: