Xerox CX240 - Manual (Page 54)

44 Chapter 3– Getting Started
If you click the Completed Jobs button again, the button is pushed in and
the list shows the completed jobs.
Discarding RTP Information
The RTP information can be discarded if desired. Under some
circumstances, it is necessary to discard RTP data—for example when you
want to re-RIP a file, archive a job without the RTP information, or edit
tabs.
To discard RTP information from a job:
¾ In the Storage window, right-click the relevant job and select Revert to
source .
The RTP data is discarded and the file returns to its original format—
for example, PostScript.
Note: When all the status buttons are in the released (unselected) position, The
Storage window shows no jobs.