Xerox CX240 - Manual (Page 217)

Setting Parameters in the Job Parameters Window 207
4. Click Apply .
The exception is added to the Exception area.
To delete an exception:
¾ In the Exception area, select the desired exception and click the
Remove button .
Managing Inserts
To add an insert:
1. In the Insert area, click the Add button .
2. In the After page box, type the number of the page that will precede
the insert.
3. In the Quantity box, type the number of inserts that you want.
4. In the Paper size list, select the desired paper stock size. If you select
Custom , type the height in the H box and width in the W box, and
then select LEF or SEF .
5. In the Media type list, select the desired paper stock type. The default
setting is Use Printer Settings . When this option is selected, your job
is printed on the media type that is defined on the Xerox DocuColor
240/250 printer-copier.
6. In the Tray list, select the required tray. If you select Auto , any tray
with the specific paper size will be used.
7. Click Apply .
The insert is added to the Insert area.
To remove an insert:
¾ In the Insert area, select the desired insert and click the Remove button
.