Xerox CX240 - Manual (Page 210)

200 Appendix A– Setting Parameters
APR
1. In the APR options area, select one of the following options:
• Print with high res: replaces low-resolution images in your job
with high-resolution images that are located in a specified APR
path.
• Print with low res: prints the job with the existing low-resolution
images—for example, for proofing purposes.
2. In the Use APR mask from area, select one of the following options:
• PostScript image: uses the masking data contained in the low-
resolution image file.
• High res: uses the masking data contained in the high-resolution
image file.
• Both: uses the masking data that is common to both high-
resolution and low-resolution image files. For example, if the
images defined by the two sets of masking data overlap, the
overlapping area is RIPed.
Note: This parameter is available only if you have the Pro configuration.
Note: If the masking data in the low-resolution image file defines a
completely different part of an image than the masking data in the
high-resolution file, no masking data is used.