Xerox CX240 - Manual (Page 235)

Backing Up and Restoring the Software 225
5. When the RCVR LED (7) illuminates steady orange, go to Start >
CX250 > CX250 Tools > System Backup and Restore > Set Factory
Default recovery
.
6. When the OS confirmation message appears, click OK .
7. Press the green On/Off button continuously for 4-5 seconds to restart
the Spire CX250 color server.
Ghost copies the files from partition E to partition C, and then from
partition E to partition D. This process takes approximately
10-15 minutes.
8. When Ghost finishes copying the files and the RVCR LED (7)
illuminates steady green, using the tip of a pen or similar object, press
the
RCVR button to exit recovery mode.