Automatic screening, Calibration reminder – Xerox CX240 User Manual
Page 172
162
Chapter 8– System Administration
Automatic Screening
The Spire CX250 color server supports Dot and Stochastic screening.
When you print a job from the Spire CX250 color server, select the
automatic screening method. By default, automatic screening applies two
types of screen:
•
For text or line-art elements (line work), the system uses line type
screen of
Line 200
.
•
For continuous tone (CT), the system uses dot type screen of
Dot 200
.
To change the values of the automatic screening method:
1.
In the Settings window, select
Color
.
2.
Select the required setting for LW from the
LW
list.
3.
Select the required setting for CT from the
CT
list.
You are prompted to restart the application for the new settings to take
effect.
Calibration Reminder
Set the Calibration Reminder to remind you when to perform a
calibration.
1.
In the Settings window, select
Color
.
2.
In the
Calibration Reminder
area, select the
Set calibration reminder
every (Hours)
check box and select the number of hours in the list.
The calibration reminder indicator appears when it is time to
calibrate.