Xerox CX240 - Manual (Page 156)

146 Chapter 8– System Administration
To change the TCP/IP network settings:
1. In the Settings window, select Network Setup .
2. In the TCP/IP area, click Change Settings next to the IP Address
parameter.
The Local Area Connection Properties dialog box appears, followed by
the Internet Protocol (TCP/IP) Properties dialog box.
3. Change the IP Address by selecting Obtain an IP address
automatically .
Or:
Select
Use the following IP address and type the desired address—for
example, IP address:192.168.62.1 and Subnet mask:255.255.255.0 .
4. Click OK .
5. Click OK in the Local Area Connection Properties window.
You are prompted to restart your computer.
6. Click No if you need to make more changes, or Yes to reboot.