Xerox CX240 - Manual (Page 211)

Setting Parameters in the Job Parameters Window 201
Job Flow
The Job Flow parameter enables you to specify a job flow for a job that is
imported to the Spire CX250 color server from the network or from the
Spire CX250 color server folders.
¾ Select one of the job flow options:
ˆ Process & Print : to set the Spire CX250 color server to RIP the PDL
files, print them, and store them in the Storage window (unless the
Job Deletion parameter is set to Delete after Complete )
ˆ Process & Store : to RIP the PDL files and move them to the Storage
window as RTP jobs
ˆ Spool & Store: places the PDL files directly into the Storage window
without processing them.
Preflight
¾ Select Run Preflight check to check the status of key job components
before the job is sent for printing.
Your job is RIPed and the missing components are identified.
You can set the preflight to detect the following problems:
ˆ High-resolution images
ˆ Incorrect links to the high-resolution images folder
ˆ Missing fonts
ˆ Spot colors that are not defined in the Spire CX250 color server
spot color dictionary
The results of the preflight check are displayed in a Preflight Report. To
generate this report, right-click the RTP job in the Storage window and
select
Preflight Report . For more information on the Preflight Report, see
Preflight Report on page 103.
Note: This option can be defined only through the PPD parameters of the
virtual printer.
Note: If a job component is missing, the job fails before it is RIPed and an alert
message appears. The job is transferred to the Storage window. Information
about missing components will appear in the Job History window.