Xerox CX240 User Manual
Page 233
Backing Up and Restoring the Software
223
5.
When the RCVR LED (7) on the Spire CX250 color server illuminates
steady orange, go to
Start > CX250 > CX250 Tools > System Backup
and Restore > Set Last Image recovery
.
6.
When the OS confirmation message appears, click
OK
.
7.
Press the green
On/Off
button continuously for 4-5 seconds to restart
the Spire CX250 color server.
Ghost copies the files from partition E to partition C. This process
takes approximately 5-10 minutes.
8.
When Ghost finishes copying the files and the RVCR LED (7)
illuminates steady green, using the tip of a pen or similar object, press
the
RCVR
button to exit recovery mode.
9.
Restart the Spire CX250 color server.
a.
Press the green
On/Off
button continuously for 4-5 seconds. The
Spire CX250 color server shuts down.
b.
Press the green
On/Off
button again. LED 1 illuminates steady
green and the Spire CX250 color server restarts.
The backed up file runs, and the Spire Application software starts.
10.
A system message may appear requesting you to restart the computer.
a.
Quit the Spire Application software.
b.
Click
Yes
to restart your computer.