Xerox CX240 - Manual (Page 200)

190 Appendix A– Setting Parameters
¾ In the Gradation list, select one of the defined gradation tables.
Brightness
Use this option to make last-minute adjustments to the print job after
proofing.
¾ To select a brightness level for a job, move the Brightness slider to the
required brightness level (the range starts from Light , which applies
-15%, to Dark , which applies +15%).
Contrast
Adjust the Contrast option to control the difference between light and
dark tones in your image.
¾ To select a contrast level for the print job, move the Contrast slider to
the required contrast level (the range starts from Less , which applies
-10%, to More , which applies +10%).
Note: The default setting is None. No gradation table is applied to your job.