Xerox CX240 - Manual (Page 131)

Calibrating with the X-Rite DTP34 QuickCal Densitometer 121
14. Select Save as and select the required name for the calibration table.
Type your own or select one from the list.
Or:
Select
As default table (Normal) to save the calibration table as
Normal .
Note: Each time you save a calibration table as default, it is saved twice, once
as Normal look up table, and once as the Saturated look up table. The Spire
CX250 color server automatically overwrites the existing Normal and
Saturated calibration tables.
Tip: It is strongly recommended that you include the specific paper name and
screen method in the calibration table file name. This helps you select the
correct calibration table in the job setup.