Verizon One - Manual (Page 51)

© 2006 Verizon
Verizon One User Guide
51
14.2 Add a New Name (cont’d)
1. Enter a name with up to 11 characters
at the blinking underscore using the
keypad characters (0-9, *, #).
Note: If you try to input more than 11
characters, an error tone will be
heard and additional input will not be
accepted.
If you are saving a Name from your
Incoming Calls Log, the caller’s
Name will be already be displayed in
the “Name” field as it appeared on
your Caller ID, as displayed below:
2. Select [Clear] to delete (backspace)
characters.
3. Press to return to the Standby
screen. This will cancel your input. Or,
4. Press while you are at
the Name screen to display the
Number screen:
5. Enter a number at the blinking
underscore using the keypad
characters (0-9, *, #). Ignore dashes
as they will be inserted for you.
If you are saving a Number from
your Incoming Calls Log, the caller’s
Number will be displayed in the “Name”
field as it appeared on your Caller ID, as
displayed below:
6. Select [Clear] to delete (backspace)
numbers, if you make an error.
Note: Press the # symbol once to
enter “#.” Press the # symbol twice to
insert “P,” which provides a 3 second
pause during dialing. If you try to input
more than 24 digits, an error tone will
be heard and additional digit input will
not be accepted.
14. Using the Handset Phonebook Menu