Tyco F3200 - Manual (Page 9)

Document No: LT0122 F3200 Installation & Programming Manual
Introduction
Issue 2.7 5 July 2001 Page 1-3
1.2 ASSOCIATED DOCUMENTATION
1.2.1 PRODUCT
Additional information on the AS1603.4 approved F3200 FIP is found in the following product
manuals.
F3200 Operator's Manual A guide to the operation and maintenance of the F3200 FIP.
Part Number LT0119 is a loose A4 version.
Part Number LT0120 is a bound A5 version.
F3200 Technical Manual A technical description of the F3200 system and modules.
Part Number LT0121.
F3200 Installation & This manual.
Programming Manual Part Number LT0122.
F3200 Panel-Link Upgrade Upgrade instructions on how to make the F3200 panel
and Installation Manual network capable. Part Number LT0198.
Information on the AS4428.1 approved F3200 is found in the following manuals:
F3200 AS4428.1 Operator’s Manual For panels that comply with AS4428.1
LT0251 is in A4, loose leaf form.
LT0250 is in A5, bound form.
F3200 AS4428.1 Installation & Provides information for designing, installing
Configuration Manual and commissioning an F3200 and NDU. Part
Number LT0255.
F3200 AS4428.1 Programming Manual Provides information for programming
an F3200 and NDU. Part Number LT0256.
1.2.2 STANDARDS
This manual makes reference to the following Australian and New Zealand Standards:
AS1603.4 Automatic Fire Detection and Alarm Systems
Part 4 - Control and Indicating Equipment.
AS4050 (int) Fire Detection and Fire Alarm Systems - Fire Fighter's Control
and Indicating Facilities.
AS1668 SAA Mechanical Ventilation and Airconditioning Code.
AS1670.1 Automatic Fire Detection and Alarm Systems - System Design,
Installation and Commissioning.
AS4428.1 Fire Detection, Warning, Control and Intercom Systems -
Control and Indicating Equipment
Part 1 : Fire
NZS4512 Automatic Fire Alarm Systems in Buildings