Oce North America TDS600 - Manual (Page 96)

96 Océ TDS600 Multifunctional Digital System User Manual
[58] Example of adjusting the leading/trailing edge of an original
▼ ▼ ▼ ▼ Copy with removed filing strips along the leading and trailing edge
1 Open the ‘Sheet’ card in the ‘Original’ section.
2 Press the ‘Remove strip’ function button.
[59] Removing strip
3 Adjust the values in mm for the trailing edge using the numeric or arrow
buttons.
4 Press the ‘Remove strip’ function button again.
5 Adjust the values in mm for the leading edge using the numeric or arrow
buttons.
6 Make other settings as required.
7 Feed the original.
Leading edge:
- 40 mm
Trailing edge:
+ 40 mm
Trailing edge:
- 40 mm
Leading edge:
+40 mm