Oce North America TDS600 - Manual (Page 326)

326 Océ TDS600 Multifunctional Digital System User Manual
EPA E
NERGY
S
TAR
®
Océ-Technologies B.V. has joined the E NERGY S TAR
®
program of the United
States Environmental Protection Agency (EPA). The purpose of the E NERGY
S TAR
®
program is to promote the manufacturing and marketing of
energy-efficient equipment, thereby potentially reducing combustion-related
pollution.
Using the energy management features outlined below prevents unnecessary
power consumption, which helps to prevent air pollution from electricity
generating plants and saves money on your utility bills.
The Océ TDS600 is supplied as a printer and as a copier/printer and includes
the following separate units:
1 Océ TDS600 printer
2 Océ TDS600 controller
3 Océ TDS600 monitor
4 Océ TDS600 scanner (only the copier/printer)
5 Océ TDS600 folder (optional)
As an E NERGY S TAR
®
partner, Océ-Technologies B.V. has determined that
both the printer and the copier/printer meet the E NERGY S TAR
®
guidelines for
energy efficiency.
The EPA E NERGY S TAR
®
criteria involve the following features:
Low power mode The Océ TDS600 Printer is shipped with the low power
mode default time set at 30 minutes, which means that the device automatically
enters the low power mode 30 minutes after the last print is made.(*) The low
power mode default time can be adjusted by the key operator to between 5 and
60 minutes. The low power mode recovery time is less than 1 second, after
which printing can be resumed (“instant printing”, i.e. time to first print less
than 40 seconds).
The Océ TDS600 has a stand-by mode which complies with the E NERGY
S TAR
®
low power mode criteria for Multifunction Devices.(*) The default
time is zero and the recovery time is less than 1 second.