Oce North America TDS600 - Manual (Page 82)

82 Océ TDS600 Multifunctional Digital System User Manual
2 Open the ‘File’ menu and select ‘Print’ or click the ‘Print’ button on the toolbar
(see figure 44).
[44] ‘Print’ button on the toolbar
The selected file will be printed with the default settings as defined in the Océ
Settings Editor (see ‘Job-related settings for printing’ on page 168).
▼ ▼ ▼ ▼ Delete a scanned file
1 Select a file in the right pane.
2 Open the ‘File’ menu and select ‘Delete’ or click the ‘Delete’ button on the
toolbar (see figure 45).
[45] ‘Delete’ button on the toolbar.
The selected file will be deleted.
Note: This option is only available if you are logged on as a Key operator
or as a Repro operator.
▼ ▼ ▼ ▼ View properties of a scanned file
1 Select a file in the right pane.
2 Open the ‘File’ menu and select ‘Properties’ or click the ‘Properties’ button on
the toolbar (see figure 46).
[46] ‘Properties’ button on the toolbar.
The following window appears (see ‘‘Scanfile properties’ window’ on
page 83):