Oce North America TDS600 - Manual (Page 205)

Océ Power Logic: Settings Editor (for the system administrator) 205
System Administrator settings
In order to perform special system administrator functions, you must log into
the Settings Editor as a system administrator (see ‘User modes’ on page 117).
Note: When you are finished, make certain you log out of the System
administrator mode of the Settings Editor to prevent unauthorized use of the
Océ TDS600.
▼ ▼ ▼ ▼ Make system administrator settings in the Settings Editor
1 Maximize the Settings Editor on the screen.
2 Log in as system administrator.
See ‘User modes’ on page 117 for more information about logging into the
Settings Editor.
3 Click on one of the top buttons to display the desired group of settings.
4 Select the setting you want to update in the tree structure.
5 Update the setting in the update area, as required.
Note: A few settings, such as the default pen settings, are made directly
from the tree structure area.
6 Click on the ‘Apply’ button.
The new value is now applied for the setting
7 Log out of the System administrator mode when you are finished updating
settings.
See ‘Océ Power Logic: Settings Editor (for the key operator)’ on page 139 for
more information about the Settings Editor for the key operator.