Oce North America TDS600 - Manual (Page 187)

Océ Power Logic: Settings Editor (for the key operator) 187
Zoom steps
The Key-Operator can change the 8 zoom steps in the range from 25.0% -
400.0% in steps of 0.1%. There are 4 zoom steps to reduce and 4 zoom steps
to enlarge (see figure 107). The zoom step 100.0% can not be changed.
[107] Zoom steps for key operators
The defaults for the 8 zoom steps are:
■
Reduction step 1: 70.7%
■ Reduction step 2: 50%
■ Reduction step 3: 35.5%
■ Reduction step 4: 25%
■
Enlargement step 1: 141.4%
■ Enlargement step 2: 200%
■ Enlargement step 3: 282.8%
■ Enlargement step 4: 400%
Timers
There are three, scanner related, timer settings a key operator can change (see
figure 108):
■ Panel time out
■ Set time out
■ Automatic feed time out