Oce North America TDS600 - Manual (Page 52)

52 Océ TDS600 Multifunctional Digital System User Manual
Background compensation
You can use the ‘Background compensation’ function with dark originals.
Select ‘Background compensation’ on, to get all information correct on the
copy. A grey background is visible.
If you select ‘Background compensation’ off, there is no grey background, but
weak lines will be affected.
Deliver originals after scanning
You can choose for delivery of the original at the front (rewind) or the rear side
of the scanner.
Attention: The ‘Rewind’ function is disabled if the optional copy delivery
tray is installed.
Note: If you are copying thick or very thin originals, originals that are
damaged or originals in a carrier sheet, it is recommended to use the output at
the rear side of the scanner to ensure correct delivery (‘Rewind’ function off).
▼ ▼ ▼ ▼ Select original delivery
1 Open the ‘Scanner’ card in the ‘Original’ section.
2 Press the ‘Rewind original’ function button to make your selection:
■ ‘On’: Originals are delivered at the front side of the scanner. You have to
collect each original by hand.
■ ‘Off’: Originals are delivered at the rear side of the scanner.
[20] Using the Rewind original function to select original delivery at the front or the rear
Access to
ial Access to
Page Interrupt
job