Oce North America TDS600 - Manual (Page 101)

Special copy and scan jobs 101
Editing functions
The Océ TDS600 Copier has editing functions. You set the functions before
you scan the original.
Note: You can select only one edit function at a time.
Auto align
To align the image automatically to a side of the print you can use the
alignment functions of the Océ TDS600 scanner. Alignment is possible in the
following ways (see figure 62):
[62] Auto align options with standard cut option active
▼ ▼ ▼ ▼ Select default settings for auto shifting with standard cut option
Note: You must switch on standard cut length to get copies like the one in
the example of illustration 62 above.
1 Open the ‘Layout’ card in the ‘Print’ section.
Top Left Top Middle Top Right
Middle Left Middle Middle Right
Bottom Left Bottom Middle Bottom Right