Oce North America TDS600 - Manual (Page 33)

Use the Océ TDS600 to print 33
▼ ▼ ▼ ▼ Select a language
1 Press the ‘On line’ button on the printer operating panel to put the printer off
line. The message ‘Off line’ is displayed in the status window.
2 Press the left selection button to shift the focus to the Language option.
A shadow effect is used to indicate that the focus is set to this option.
3 Activate the Language option by pressing the right selection button.
The dotted line around the current selection is changed into an uninterrupted
line and the small selection triangles next to the specified language are no
longer dimmed.
4 Use the up/down buttons to switch between the predefined languages.
5 The language specific elements on the display are immediately customized to
reflect your language choice. Only the indicator for the language itself, is in
the alternative language. This way you always know what your alternative
language is.
6 Put the printer on line again by pressing the on line button. The printer now
uses the selected language.