Oce North America TDS600 - Manual (Page 169)

Océ Power Logic: Settings Editor (for the key operator) 169
Number of prints/sets
Description The ‘Number of prints/sets’ option allows you to define the
default number of prints for each job in the printer memory.
Min/max values 1 - 999
Menu path Jobs - Print - Defaults - Number of prints/sets
Collate
Description Specifies whether or not a number of originals should be proc-
essed together as a set. If set processing is off, sorting is al-
ways done by page and every original will be presented as a
job. If set processing is on, sorting is done by page and all
originals will belong to the same job until the set is closed, or
sorting is done by set.
Min/max values N/A
Menu path Jobs - Print - Defaults - Collate
Default print mode
Description With the print mode the printer Image Logic can be set in a
mode that matches the contents of the image. Setting the de-
fault print mode according to the main stream contents of the
print jobs, will improve the quality of printed images. The de-
fault print mode setting is used when the Image Logic is not
able to automatically detect the appropriate print mode.
Select ‘Poster’ for images with domination of grey areas.
Select ‘Lines/Text’ for scanned images.
Select ‘Standard’ otherwise.
Min/max values N/A
Menu path Jobs - Print - Defaults - Default print mode
User id
Description You can use the ‘User id’ option to determine how many jobs
are processed by that user.
Min/max values N/A
Menu path Jobs - Copy & File - Defaults - User id