Oce North America TDS600 - Manual (Page 157)

Océ Power Logic: Settings Editor (for the key operator) 157
Custom scan width
Description The ‘Custom scan width’ option allows you to select the
width that will be scanned:
Useful if the original has an arbitrary width. This setting will
overrule the automatically detected original format.
The setting is used in combination with ‘Scan width method’.
Min/max values 25 - 914 mm
Menu path Jobs - Copy & File - Defaults - Original card - Sheet - Custom
scan width
Scan length method
Description Use ‘Scan length method’, to select the length that will be
scanned.
Standard: The scan length is according to the automatically
sensed original length.
Non-standard: The scan length extends to the first original
length sensor that is not activated or to the maximum original
size.
Custom-selected length: Useful if the original is of a
non-standard format. This setting will overrule the automati-
cally detected original size.
Min/max values N/A
Menu path Jobs - Copy & File - Defaults - Original card - Sheet - Scan
length method
Custom scan length
Description The ‘Custom scan length’ option allows you to select the
length that will be scanned.
Useful if the original has an arbitrary length. This setting will
overrule the automatically detected original format.
The setting is used in combination with ‘Scan length method’.
Min/max values 1000 - 15000 mm
Menu path Jobs - Copy & File - Defaults - Original card - Sheet - Custom
scan length