Oce North America TDS600 - Manual (Page 104)

104 Océ TDS600 Multifunctional Digital System User Manual
Note: When you shift the image horizontally, you can only shift to the left
or to the right.
3 Press the ‘Shift’ function button again and select a vertical shift value by
pressing the numeric or arrow buttons until the required distance is set to shift
the image upwards or downwards.
Note: When you shift the image vertically you can only shift up or down.
4 Make other settings as required.
5 Feed the original.
Note: You can use horizontal and vertical shift simultaneously.
Mirror-image copies
With the Océ TDS600 Copier you can make a mirror-image copy of an
original, as shown in the next figure:
[67] Example of a mirror-image copy
▼ ▼ ▼ ▼ Make mirror-image copy
1 Open the ‘Image’ card in the ‘Print’ section.
[68] Mirror-image
2 Press the ‘Mirror’ function button to enable the ‘Mirror’ function.
3 Make other settings as required and feed the original.
Roll 2
type
Process