Oki B4545 MFP - Manual (Page 95)

95
Operation
Duplex mode (With optional duplex unit installed)
This selection is not available for flatbed copies (page changes are
not managed on the flatbed scanner) or for the Identity Card mode.
Case of a duplex printer (option) with compatible paper type:
Case of a simplex or duplex printer with incompatible paper type:
Zoom selection
This selection is not available for Mosaic/Banner and Identity Card
modes.
For normal mode, the selection principle is as described for the
ZOOM key.
Origin selection
This selection is not available for Mosaic/Banner and Identity Card
modes:
On the ADF scanner, with the sheet being centered by the margin
stops, the default value xxx is not necessarily 000: this value is now
computed automatically once the output format and zoom
coefficient have been selected.
Assembled copy selection (collating)
This mode, also called "sorted copy" mode, can be used for scanning
a complete document on the ADF scanner then for printing this
document n times (in "non-assembled" mode - default setting -,
each scanned page will be printed n times).
1>DUPLEX
->DUPLEX
2 1-SIDE ->DUPLEX
3 DUPLEX ->1-SIDE
4 1-SIDE ->1-SIDE
1>1-SIDE
->1-SIDE
2 DUPLEX
->1-SIDE
ZOOM
100%
ORIGIN
X=XXX Y=000