Oki B4545 MFP - Manual (Page 26)

26
Installation
Telephone and LAN connection
+
Plug the end of the telephone line (F) into the terminal socket (D) and the
other end into the wall telephone socket.
+
LAN connection (depending on model). Plug end of the LAN cord (as
provided by your network administrator) into the socket (C) of your terminal
and the other end into your local network port dedicated to your terminal.
Power line connection and switch on
Caution - Refer to safety procedures in the chapter on Safety.
+
Plug the end of the mains power cord (G) into the socket (E) of the terminal
and the other end in the wall outlet.
+
Set the On/Off switch to position "I" (On).
After a few seconds, when the printer has warmed up, the date and time will
appear. To adjust the language and time of your terminal, refer to paragraph
Setting your terminal, page 38.