Oki B4545 MFP - Manual (Page 51)

Setting your terminal
51
To configure the local network setting manually:
2531 OK - SETUP / NETWORKS / LOCAL NETWORK /
CONFIGURATION
+
Choose MANUAL and press OK to confirm.
IP address
2532 OK - SETUP / NETWORKS / LOCAL NETWORK / IP
ADRESSE
+
Enter the IP address of your terminal and press OK to confirm.
Sub-network mask
2533 OK - SETUP / NETWORKS / LOCAL NETWORK / SUBNET
MASK.
+
Enter the sub-network mask of your terminal and press OK to confirm.
Gateway address
2534 OK - SETUP / NETWORKS / LOCAL NETWORK /
GATEWAY
+
Enter the IP address of the network gateway and press OK to confirm.
IEEE address (or Ethernet address) or MAC address
2535 OK - SETUP / NETWORKS / LOCAL NETWORK / IEEE
ADRESSE
The Ethernet card of your terminal already has an unmodifiable, yet
consultable, IEEE address.
Netbios names
These names, which can be used with the network options, are used to
identify your terminal from a PC connected to a local network (for instance
with the name "IMP-NETWORK-1").
2536 OK - SETUP / NETWORKS / LOCAL NETWORK /
NETBIOS 1
2537 OK - SETUP / NETWORKS / LOCAL NETWORK /
NETBIOS 2
+
Enter the selected name (15 characters max) and press OK to confirm.
The WINS1 and WINS2 servers, used with the network options, allow access
to terminals on other sub-networks by means of their NetBIOS name.