Oki B4545 MFP - Manual (Page 89)

89
Operation
"Sophisticated" copy
+
Position the document (refer to paragraph Document
depositing, page -74).
+
Press key .
+
Enter the required number of copies and confirm with the OK
key.
+
Using the keys or select the scan modes 1
DUPLEX->DUPLEX (Front/Rear) or SIDE->DUPLEX or
DUPLEX->SIDE or SIDE->SIDE and confirm with the OK key.
+
If you have selected for printing the mode DUPLEX , select with
the keys or LONG BORDER or SHORT BORDER and confirm
with the OK key.
+
Using the keys or select the resolution: ULTRA FAST ,
FAST , QUALITY or PHOTO and confirm with the OK key.
+
Using the keys or select the degree of contrast and
confirm with the OK key.
+
Using the keys or select the degree of brightness and
confirm with the OK key.
+
Select the collation mode COPY ASSEMBLED or NOT ASSEMBLED
and confirm with the OK key.
+
Using the keys or or the numeric key pad or eventually
the key dedicated for zoom set up the degree of zoom between
25% TO 400% and confirm with the OK key.
+
Using the keys or or the numerical key pad select the
required base values and confirm with the OK key.
+
Using the keys or select the type of paper NORMAL PAPER
or THICK and confirm with the OK key.
+
Using the keys or select the required paper tray,
AUTOMATIC TRAY , UPPER TRAY or LOWER TRAY and confirm
with the OK key.
S
PECIFIC COPY SETTINGS
When the copy quality is no longer satisfactory, you can perform a
calibration. To do so, refer to paragraph Scanner calibration,
page -138.
Moreover, a high number of controls let you improve the copy
quality.
1. If you have previously installed the duplex module at the back of your terminal.