Roland VS-2480 - Manual (Page 94)

7—Project and Drive Operations
94 www.rolandus.com Roland VS-2480 Owner’s Manual
In the project list, you can also see all of the projects on the currently selected drive. The
VS-2480 provides information about each project.
Selecting an Item in the Project List
To select a project or drive shown in the project list:
1. Press or or turn the TIME/VALUE dial until the desired item is outlined.
When an item is outlined and has an arrow pointing to it from the right, it’s selected.
To Display the Projects on a Drive
1. Select the drive. When a drive is selected, the LIST button appears
in the screen’s lower-right-hand corner.
2. Press LIST—the VS-2480 displays a list of the projects on the drive.
About “Store Current?” Messages
During the course of most PROJECT menu operations, the VS-2480 asks you:
The VS-2480 displays this message when an operation needs to temporarily borrow the
part of the VS-2480’s memory that holds the currently loaded project—after the
operation is complete, the VS-2480 re-loads the project from your hard drive. If you’ve
made any changes to the project since you last stored it, press ENTER/YES in response
to this message to ensure that those changes aren’t lost.
To learn how to connect a CD-R/RW drive or a Zip drive to the VS-2480, see Page 381.
If you encounter error messages when working with a CD-R/RW drive or a Zip drive,
check Page 353 or the
VS-2480 Appendices to learn what the messages mean.
We’ll discuss write-protection, project sample rates and recording modes later on in
this chapter.
To view the contents of an audio CD, see “The CD Player Feature” on Page 353.
If a project is write-protected (Page 99), this message doesn’t appear, since the project is
locked to prevent the making of any changes to it.
Size Write-protect status Sample rate
Name Recording mode Creation date and time
Type of project
PROJECT menu
F6 (LIST)
Project name
Position in project list
Sample rate and
recording mode
VS2480OMUS.book 94 ページ ２００６年２月７日 火曜日 午後４時１６分