Roland VS-2480 - Manual (Page 383)

29—Expanding the VS-2480
Roland VS-2480 Owner’s Manual www.rolandus.com 383
3. Turn the VS-2480 over onto its back, and remove only the screws shown in the
following illustrations.
4. The battery should now be visible, as shown here.
5. Remove the VS8F-2 for Effect A.
6. Replace the old battery with a new one.
The VS-2480 uses a lithium CR2032 battery that you can purchase at most electronics
stores.
CR2032
VS2480OMUS.book 383 ページ ２００６年２月７日 火曜日 午後４時１６分