Roland VS-2480 User Manual
Page 23

Step-By-Step Instruction Finder
Roland VS-2480 Owner’s Manual
www.rolandus.com
23
Activating Looped Playback
Editing Loop FROM and TO Points Manually
Setting Loop Points Using Locators
Setting Loop Points Using Markers
Setting Loop Points When a Project Isn’t Playing
..............................................................................................181
Setting Loop Points While a Project Is Playing
MIDI
Changing Effect Patches via MIDI
Changing Scenes via MIDI
Receiving SysEx Bulk Dump Data
Remote Control of the VS-2480 with Control Change Messages
.....................................................................303
Remote Control of the VS-2480 with SysEx Messages
......................................................................................302
Sending SysEx Bulk Dump Data
Setting Up a MIDI Metronome
Using the VS-2480 as a MIDI Control Surface
Markers
Clearing Markers
Editing Markers
Moving the Timeline to a Marker
Placing a Marker
Mastering
Building Mastering Tracks Selection-by-Selection
............................................................................................344
Editing Mastering Tracks
Navigating to the Mastering Room
Placing CD Track Markers
Recording Mastering Tracks
Selecting the Mastering Room Operating Mode
................................................................................................343
Selecting the Mastering Tracks’ Recording Mode
.............................................................................................343
Selecting the Mastering V-Tracks
Stretching Effects
Turning On the Mastering Room
Using the Mastering Tool Kit
Metronome
Programming the Metronome’s Beat Box
Sending the Metronome to Outputs
Setting Up a MIDI Metronome
Moving Through a Project
Muting Channels in Mute Mode
Naming
Entering a New Name Using the VS-2480 Controls
............................................................................................74
Entering a New Name from a Keyboard
Outputs
Routing a Pair of Busses to a Pair of Outputs
Routing a Pair of Busses to the Stereo MONITOR Bus
.....................................................................................289
Routing a Pair of Tracks to a Pair of Outputs
Setting Up Pre or Post Track Direct Outputs
PAN/AUX SEND 1-8 Knobs
Activating Knob Control of Any Channel Parameter
.......................................................................................141
Activating Knob Control of Aux Send Levels
Activating Knob Control of Channel Panning
Activating Knob Control of Dynamics and EQ Parameters
.............................................................................140
VS2480OMUS.book 23 ページ 2006年2月7日 火曜日 午後4時16分