Roland VS-2480 - Manual (Page 249)

18—Editing Tracks
Roland VS-2480 Owner’s Manual www.rolandus.com 249
Editing from the TRACK Menu
You can perform any phrase or region editing operation from the TRACK menu.
How the TRACK Menu Is Organized
The TRACK menu presents all phrase and region editing operations in two sub-menus:
• The TRACK PHRASE EDIT MENU • The TRACK REGION EDIT MENU
The large PHRASE and REGION symbols that appear at the right side of the screen tell
you at a glance which menu is currently displayed.
The Appearance of TRACK Menu Screens
TRACK menu screens, as shown on the previous page, don’t fill the entire display—
parts of the Home screen remain visible to make editing easier. You can move around a
project using the current time location display (Page 126). The playlist is visible in most
edit screens. The meters display—or the fader/pan displays—may also remain in view.
Sources and Destinations in the TRACK Menu
When you’re moving or copying phrases and regions, or if you’re swapping regions on
different tracks in the TRACK menu, designate the:
• source track —the track you’re moving or copying audio from.
• destination V-Track —the track to which you’re moving or copying the audio.
The parameters unique to each phrase or region editing operation are described in
Chapters 19 and 20, respectively.
If you’re viewing: Switch to the: By pressing:
TRACK PHRASE EDIT MENU TRACK REGION EDIT MENU F6 (Ph → Reg)
TRACK REGION EDIT MENU TRACK PHRASE EDIT MENU F6 (Reg → Ph)
You can also select the desired menu by pressing PHRASE•REGION•AUTOMIX until
it turns the desired green or red.
When the playlist is visible during editing, you can press WAVE DISPLAY to replace
the playlist with the wave display.
MENU
PROJECT TRACK EFFECT UTILITY
VS2480OMUS.book 249 ページ ２００６年２月７日 火曜日 午後４時１６分