Roland VS-2480 - Manual (Page 47)

2—Getting Around
Roland VS-2480 Owner’s Manual www.rolandus.com 47
4—SMPTE IN Jack
When synchronizing the VS-2480 as a slave to an external SMPTE-generating device,
connect the external device’s SMPTE output to the VS-2480’s SMPTE IN jack.
Synchronization is discussed in Chapter 24, starting on Page 307.
5—PS/2 KEYBOARD and MOUSE Jacks
Connect a PS/2 ASCII keyboard (purchased separately) and mouse (shipped with the
VS-2480) to the PS/2 KEYBOARD and MOUSE jacks, respectively. See Page 62.
6—MIDI OUT/THRU Jack
By default, this jack functions as a MIDI output jack—connect it to the MIDI input of
any device to which you wish to send MIDI data from the VS-2480 (see Chapter 24,
Page 299). You can also set the MIDI OUT/THRU jack to function as a THRU jack that
passes along any MIDI data the VS-2480 receives from an external device (Page 300).
7—MIDI IN Jack
Connect the MIDI output of an external device to the MIDI IN jack when you want the
VS-2480 to receive and respond to MIDI data transmitted from an external device. See
Chapter 24, starting on Page 299.
8—FOOT SWITCH Jack
You can control a variety of VS-2480 functions using an optional foot switch—such as a
Roland DP-2 or BOSS FS-5U—connected to this jack. See Page 362.
Slave
PS/2, ASCII
WORD CLOCK IN VGA OUT SCSI
R L R L R L
FOOT
SWITCH
MONITOR AUX A AUX B
3 4
R L
MASTER
1 2 5 6 7 8 PHONES 1 PHONES 2
ANALOG MULTI OUTPUT
KEYBOARD
SMPTE
IN MOUSE
MIDI
IN OUT / THRU
PS / 2
OUT IN OUT IN
DIGITAL
OPTICAL
2
COAXIAL
THIS DEVICE COMPLIES WITH PART 15 OF
TO THE FOLLOWING TWO CONDITIONS:
THE FCC RULES. OPERATION IS SUBJECT
(1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST
ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY
CAUSE UNDESIRED OPERATION.
/
DIGITAL 8ch I / O DIGITAL 8ch I / O
1
+4dBu BALANCED / -2dBu UNBALANCED
(TIP)
(RING) (SLEEVE)
HOT
COLD GND
4 5 6 7 8 9 10
12 11 13 14 15 16
VS2480OMUS.book 47 ページ ２００６年２月７日 火曜日 午後４時１６分