beautypg.com

The ch edit assign screen, Parameter view, The ch edit assign screen parameter view – Roland VS-2480 User Manual

Page 167

background image

11—Input and Track Channel Tools

Roland VS-2480 Owner’s Manual

www.rolandus.com

167

The CH EDIT ASSIGN Screen

On a track channel’s ASSIGN screen, you can route input channel, FX return, Aux bus
and Direct bus signals, or other tracks, to the current channel’s track for recording. The
screen acts like the EZ ROUTING VIEW screen (Page 292),
but without virtual “wires.”

To route an input channel’s signal or another track to the current channel’s track:

use the cursor buttons to select the desired signal source and turn the TIME VALUE
dial clockwise—the selected signal source highlights to show that it’s routed to the
current channel’s track. To disconnect the source, turn the TIME/VALUE dial
counter-clockwise.

click the desired signal source with your mouse—the selected signal source
highlights to show that it’s routed to the current channel’s track. To disconnect the
source, click it again.

Parameter View

The CH EDIT PRM.V (for “Parameter View”) feature allows you to view a selected CH
EDIT parameter in multiple channels at the same time. You can also adjust the
parameter in any of the displayed channels. This can save you time when you need to
adjust the same parameter in a group of channels.

You can route as many input channel signals or tracks to the current channel’s track as
you like.

If you select a stereo source—linked input channels, tracks or Aux busses—both linked
signals will be combined and routed into the current channel’s track. If the current
channel’s linked to another channel, the left side of the source signal will go to the odd-
numbered track and the right side to the even-numbered track.

To activate the Parameter View, press F6 (PRM.V) from any CH EDIT screen. On a track
channel’s CH EDIT VIEW screen, however, F6 (PRM.V) is unavailable when the
STATUS parameter is selected—choose another parameter to activate F6 (PRM.V).

The 24 input
channels

Tracks

The eight
Direct Busses

The eight

Aux Busses

The eight

FX returns

Selected channel and

parameter (group)

Parameter

Parameter

VS2480OMUS.book 167 ページ 2006年2月7日 火曜日 午後4時16分