Roland VS-2480 - Manual (Page 242)

18—Editing Tracks
242 www.rolandus.com Roland VS-2480 Owner’s Manual
If you hold down CLEAR or SHIFT, additional options appear in the pop-up.
Placing Edit Points with Your Mouse
To place an edit point with your mouse:
1. Click the mouse at the desired time location in the project. A dotted vertical line
appears. This is called the “position line.”
2. Click the right mouse button on the track playlist. The Edit Pop-Up menu appears and
offers a variety of options.
3. Drag to the name of the desired edit point so that it’s highlighted in the pop-up
menu.
4. Click the left mouse button—the selected edit point is set. You can see its flag
(Page 236) at the top of the position line above the playlist.
Selecting a Track with Your Mouse
To select a track with your mouse, click the track in the playlist, or click the track’s
number to the left of the playlist.
To: Right-click and:
Perform seven of the most
common phrase or region
editing operations (Page 246) select the desired operation from the menu. You can
select only those operations for which the required
edit points have been set.
Switch from region to phrase
editing and back select PHRASE or REGION, as desired—the
PHRASE•REGION•AUTOMIX button lights in green
(phrase) or red (region)
UNDO select the desired Undo level from the Undo list
(Page 73).
REDO reverse the last Undo operation.
Activate snapping to a
measures or beats grid select GRID. Choose the desired grid from the dialog
that appears to activate the grid.
Edit Msg turn on (checked) or off edit messages that are
displayed when you edit audio with your mouse or
perform a TRACK EDIT button operation (Page 248).
Edit messages are explained on Page 240.
To: First: Then right-click and:
Clear region edit points Press and hold CLEAR select the desired edit point.
Move the timeline Press and hold SHIFT select the desired edit point or
choose GOTO to move to the
current location of the position
line.
Position line
VS2480OMUS.book 242 ページ ２００６年２月７日 火曜日 午後４時１６分