Ricoh Aficio GX7000 - Manual (Page 212)

Panel Locked Cannot use
You have pressed a locked key. Unlock the key.
See p.152 "Restricting Printer Functions".
Reset Tray 1 correctly
The tray 1 has not been installed correctly. Reinstall the tray 1 correctly.
See p.228 "Cover Open/Tray Not Detected (Tray 1)".
Reset Tray 2 correctly
The tray 2 has not been installed correctly. Reinstall the tray 2 correctly.
See p.229 "Cover Open/Tray Not Detected (Tray 2)".
Envelp. Selector position error / Reset E.Selector or FormFeed
The position of the envelope selector and the specified paper type do not match. This message appears
also if the envelope selector is set to the
(rear) position while maintenance is carried out. Be sure to
set the envelope selector to the right position.
See p.239 "Envelope Selector Position Mismatch".
Maintenance in process...
The printer is cleaning or flushing its print head. Wait a moment.
Right Front Cover is open / Close Right Front Cover
The right front cover is open. Close the print cartridge cover.
See p.231 "Cover Open / Print Cartridge(s) Not Detected".
Paper Misfeed Tray 1 / Set paper correctly
Paper has jammed in Tray 1. Clear the jam.
See p.179 "Removing Paper Jammed in Tray 1".
Paper Misfeed Tray 2 / Set paper correctly
Paper has jammed in Tray 2. Clear the jam.
See p.180 "Removing Paper Jammed in Tray 2 (Optional)".
Paper Misfeed Bypass Tray / Check Paper Press Form Feed
Paper has jammed in the bypass tray. Clear the jam.
See p.183 "Removing Paper Jammed in the Bypass Tray (optional)".
Remove Misfeed Top or Bck Cover / Use Feed Wheel in Left Cover
There is paper still jammed inside the printer.
Remove any jammed paper.
6. Troubleshooting
210
6