Ricoh Aficio GX7000 User Manual
Page 168
Quick Install for USB
The CD-ROM may not be inserted properly.
Check that the CD-ROM is inserted properly.
Check also that it is not damaged and the CD-ROM
drive is working properly.
The power cord or USB cable may not be properly
connected.
Check that the power cord and USB cable are
properly connected and not damaged.
The operating system is incompatible.
There is insufficient hard disk space.
Check that the computer's operating system is fully
compatible with this printer. See p.31 "Checking
the Computer and Installation Area".
Other applications are not closed.
When installing software, quit all other
applications. Installation may be disrupted if other
applications are open. Also, quit any anti-virus
applications that are running.
Windows made USB settings automatically.
Open Windows' Device Manager, and then,
under [Universal Serial Bus controllers], remove
any conflicting devices. Conflicting devices have a
yellow [!] or [?] icon by them. Take care not to
accidentally remove required devices. For details,
see p.172 "Deleting Devices".
The printer is turned on before installation.
Switch the printer off and then on, and then try
Quick Install for USB again.
Windows NT 4.0 is running.
• Windows NT 4.0 do not support USB
connection with the printer. Connect the
printer via a network in this case.
• [Quick Install for USB] is unavailable. See
p.69 "Installing the Printer Driver (USB)".
• Configure the printer as a shared network
printer. See p.78 "Installing the Printer Driver
(Network)".
• For details about network printer settings, see
The USB connection does not work.
Switch the printer off, unplug the USB cable from
the printer, launch “Quick Install for USB” again,
and then switch the printer on when the dialog box
confirming printer driver installation appears. If this
does not solve the problem, press the [Menu] key
on the control panel, change “USB Setting” in [Host
6. Troubleshooting
166
6