Ricoh Aficio GX7000 - Manual (Page 149)

Specifying System Settings using the Control
Panel (System Menu)
You can set basic functions required to use the printer. The printer can be used on factory default, but the
configuration can be changed depending on the condition of the user. The changed condition holds even
if the printer is turned off.
Auto Continue
You can specify how the printer handles a print job if it does not have a tray containing paper of the
size and type specified in the printer driver.
• Off
The printer does not print until a tray containing paper of the size and type required for the print
job is inserted.
• Immediate
The printer prints even if the paper size or paper type is different from that specified.
Default: Off
Sub Paper Size
You can specify whether to print on A4 paper if the printer is not equipped with a paper tray that can
feed Letter (8
1 /
2
×11) paper specified on the printer driver, and vice versa.
• Auto
• Off
Default: Off
Energy Saver
Use Energy Saver mode to reduce the printer's power consumption.
You can specify how long the printer remains idle before it switches to Energy Saver mode. When
the printer is in Energy Saver mode, it requires time to start up when it receives a print job.
• 5 minutes
• 15 minutes
• 30 minutes
• 45 minutes
• 60 minutes
Default: 5 minutes
Notify by Email
You can specify whether or not to send notification that a printer error has occurred to a particular e-
mail address.
Specifying System Settings using the Control Panel (System Menu)
147
5